Miller Pro Heat 35
Description
Input:
Three Phase
Processes
- Induction Heating
Miller’s Induction Heating system brings a part to temperature in a fraction of the time, compared to traditional flame and resistance heating processes. It also holds the part at the specified temperature.
Multiple Outputs
Provides two insulated connectors for air-cooled blankets or liquid-cooled cables.
On-Board Temperature Control
Provides for manual or temperature-based programming in a simple-to-learn operator interface.
Multiple Control Thermocouple Inputs
Control on the hottest TC during heating and coolest TC during cooling for uniform heating and quality.
Open Output Detection
Prevents system operation without a covered output receptacle (cable or protective plug).
Cable Identification System
Knows the type of cable attached and limits output to protect cables and blankets.
Isolation Fault Protection
Provides automatic system shut down should power source output short to ground. A sense lead provides
direct feedback to the power source to sense fault condition.
Time-to-Temperature
Faster than conventional processes due to the method of applying the heat, reducing heating cycle time.
Specifications
| Part No. | Output Frequency | Rated Output | Primary/Input Voltage |
|---|---|---|---|
| N/A | 5 – 30kHz | 35kW @ 100% duty cycle | 230V |
| Fuse size | Input amps at rated output | Dimensions (mm) H x W x D | Net Weight (kg) |
|---|---|---|---|
| N/A | 60A, 400V | 669, 552, 933 | 103 |